Electrical Measuring Instruments

Power Quality Analyzer - iMC784 is a perfect solution for permanent Power Quality monitoring.

Power quality analyzer MC774 is intended for detection of local power quality deviations.

This power monitoring devices are intended for measuring, analysing and monitoring single-phase or three-phase electrical power network in electricity distribution and energy production companies, utilities, dwellings, industry, ...

Power monitoring devices are intended for measuring, analysing and monitoring of single-phase or three-phase electrical power network of electricity distribution and energy production companies.

Measuring transducers MT/UMT 5x0 are intended for measuring, analysing and monitoring single-phase or three-phase electrical power network.

Remote display is very useful for a quick look-up to all measured parameters or to set up the (U)MT5xx measuring transducers without the PC.

Measuring transducers MT 51x are intended for measuring and monitoring single-phase electrical power network.

Measuring transducers MT 4xx are intended for measuring and monitoring single phase or three-phase electrical power network.

Measuring transducer of family MI 45x are designed for use in industrial process for conversion of DC current in to appropriate DC current or DC voltage signals.

synchronization meters SQ0214 measure phase differences between generator and bus bar, voltages and the frequencies of the two systems.

The ZQ 1207 two-system frequency meter is used for measuring frequencies in two networks. The front frames of all the instruments measure 96x96 mm. Ship versions of the ZQ 1207 meters are available on request.

The ZQ 1208 two-system frequency meter is used for measuring frequencies in two networks. The front frames of all the instruments measure 96x96 mm.

The FQ 1207 double voltage meter measures voltages in two networks. The front frames of all the instruments measure 96x96 mm. Ship versions of the FQ 1207 meters are available on request.

The FQ 1208 double voltage meter measures voltages in two networks. The front frames of all the instruments measure 96x96 mm.

Meters with a moving iron are intended for measurement of AC currents or voltages of frequencies from 15 Hz to 100 Hz. They measure rms values independently on the signal form of current or voltage. The scale is interchangeable.

Meters with a moving coil and a rectifier are intended for measurement of AC currents or voltages in the frequency range from 40 Hz to 65 Hz (higher frequency range on request), where low meter consumption is required.

Meters with a moving coil are intended for measurement of direct currents or voltages.